Megha BR

Hi, I am Megha B R, I have completed my Post-Graduation in Solid State Physics and pursuing B. Ed. I am a Physics enthusiast. As an Academic writer, my goal is to reach the readers in a simplified manner through my articles. Let's connect through LinkedIn-

31+ Sound Energy Examples: Uses And Detailed Facts

by

Sound energy is produced when an object vibrates, which results in noise. The sound vibrations cause waves of pressure that travel through a medium such as air, water, and wood.

Sound energy is defined as “the movement of vibration through matter”. There must be a medium through which sound travel, it cannot travel through a vacuum and sound energy is normally measured by its intensity and pressure, in special units known as Pascal and decibels.

This post gives you a detailed explanation of such sound energy examples

An air conditioning fan

 Different things in an air conditioning fan can be creating sound energy it could be one of the motors but it could also be air resistance. If push air to another area of the home if the intake is too small motor noise is reduced by quieting the compressor. 

An airplane taking off

When the airplane is take off it causes sound energy because of the exeunt of its heave over the runway with a repute for the act of the wind. Sound energies are played by the aircraft engine which converts chemical energy into mechanical energy while taking off. 

Sound energy examples
Airplane taking off image credit: pixabay

A balloon popping

The reason behind the sound energy in balloon popping is the sudden release of pressure, this higher pressure causes bigger bursting. The sudden rupture of stretched rubber contributes to sound.

Sound energy in a microwave

Microwave causes sound energy during operation because the magnetron uses high voltage to generate the microwave frequency that cooks the food and normally emits a low hum however if the magnetron is damaged it may begin emitting high pitched sound energy.

Sound energy examples
Microwave oven image credit: pixabay

A broom swishing

When we clean the floor using a broom then the sound energy is created which is called swishing. The broom consists of a brush of strands hence the broom creates sound energy while swishing.

A buzzing bee

The bee cause sound energy by buzzing because the wings of the bee flap very rapidly these wing beads create vibration in the wind near them and cause sound energy.

Fireworks exploding

When fireworks explode we hear the delayed sound energy because the fireworks exploded so well-built up and the speed of light is faster than the speed of sound.

A flag flapping in a strong breeze

Layers of strong breeze start with unequal haste on the two sides of the cotton flag due to it, there will be unequal pressure on the two flags which leads to flapping then sound energy is created.

Meat sizzling on the grill

 When meat is sizzling we have high heat on a grill it makes a sound and turns brown, bursting up with water via oil to prepare a sizzling sound.

Shish Kebab, Meat, Kubny Plan, Delicious, Grilled Meat
Meat sizzling on the grill image credit: pixabay

A radio

 Electromagnetic radio waves convert to mechanical shudder in the speaker when radio ingest radio waves then sound energy waves created.

Radio, Vintage, Retro, Music, Old, Sound, Audio, Media
Radio image credit: pixabay

A waterfall

Low, high, and medium sound energies are formed in waterfall because waterfall of enormous volume from huge height impact by changing depth of water.

A whistle

Blowing a whistle forces air via the mouth then the air enters the whistle and escapes from a hole on the other end creating audible sound energy in the whistle.

Waves crashing into a rocky shore

Wind and rain form the wave surface, and at the wave, eye edge bubbles trapped under waterfalls onto a hard wall of rock radiate sound energy.

Car brakes squealing

The Brake system works on brake pads and rotor, when we apply to break the pads squeezing on the outside surface pad touches the rotor to create sound. 

A vehicle crashing

When stringent material crashes on a harsh floor if two vans bombard each other hence it vibrates and creates sudden sound energy.

A car door closing

The car door makes a sound when close because of spare lube on the sub latch roller axle..

A vehicle engine

If the car is running louder than it used to make strange sound energy due to a damaged muffler.

A car horn honking

The horn contains a copper coil in which current flows through it creating a magnetic field then the horn flop inside the midriff creates sound energy.

A siren

Siren makes sound energy because they have high-efficiency loudspeakers with pursued magnifier and tone generation imitate the siren sound.

Tires squealing when racing

Racing produces sound energy in tires because of Doppler effects so if a tire hits a rough surface during racing is very fast hence sound is created.

A signal

In the microphone, the signal makes sound energy because there is air pressure variation that generates electrical signals that produce sound.

A jackhammer

Rock drilling using a Jackhammer create sound energy because compressive strength increase air pressure and scraping of rock decrease hence requiring high pressure, and thrust creates sound energy.

Smoothing wood with sand paper

It creates sound energy because sandpaper is wrapped around the block which rubs on a block of wood with even pressure create sound.

Coughing

When we cough we hear the sound because our airways are narrow during coughing which creates sound energy.

Laughing

Muscles between the ribs initiation to persevere vast, hardened contraction knead air out and makes sound energy.

Sneezing

During sneezing air evades from the nose hence sound energy is created which depends on lung capacity.

Belching

During belching, in superior alimentary canal elevation pressure air preparing structure, and behind throat vibrate and causes sound energy.

Baby crying

The sound energy is created when a baby cries because the baby workout to authority the air that comes from their lungs and uses vocal cords which put a plinth for speech.

A xylophone tinkling

Xylophone consists of a set of tuned keys of a piano when the hammer assert the bar creates a shudder which creates waves making sound energy.

Electric guitar whining

Bend the string with the finger on the guitar which creates a whiny kind of sound energy because too much pressure can bend the string out of tune.

A train moving on the tracks

Train wheels roll over on tracks creating sound energy so when trying moves vibrations are created because of hardness and inconsistency on the wheel and train surface.

Uses of sound energy

Battle fields

 Sound is used as a weapon in the war field, for example, sonic weapons are used to perpetrate adversary and acoustic equipment which uses the effect of sound to cause potentially lethal disaster.

Shipping industry

Sonar sound navigation and ranging are used in the shipping industry for detecting submerged objects through sound waves reflected by objects and also locating enemy ships.

Music industry

The music instruments and amplifier produce sound as music which is used in healing the body by deletion unconstraint and body aches.

Cellular telephone

The telephone uses sound energy for communication in which sound energy is transported in the midriff and converted to electrical energy and another phone receives this electrical energy then converted to radio waves for intimation.

Motion picture sound recording

The photographic scene uses a unique system recording that gives the highest flexibility in the soundtrack but motion picture sound recording uses a couple of systems to separate the image from the soundtrack so sound can perfectly be matched ocular.

Televisions

In television, electrical energy from the battery is converted to visible light, and television consists of a camera that steers a depiction and sound into a denotation, the transmitter sends the logogram over the air, and the receiver captures the logogram and orders it back into picture sound.

Flat Screen, Television, Screen, Tv
Television image credit: pixabay

Phonographs

   Phonograph consists of reproducer containing diaphragms which are connected to needle by thin wire when it is operated sound waves give same intensity, frequency as originals. The phonograph is the earliest technology to playback recordings we could record at home.

Phonograph, Turntable, Vinyl, Record, Album
Phonographs image credit: pixabay

Electronics

The piezoelectric generator is a power generating device it contains a transducer that creates noise and causes a vibration transducer to convert this vibration into electrical energy. 

Hearing aids

Hearing aids are designed to dilate sound which improves the sage language in a noisy environment. A small computer in a hearing aid turns up incoming sound signals this accommodates for person’s hearing loss.

Audio tape archivist

Audiotape archivist is a sound recording and reproduction device it uses magnetic tape as storage to move to tape-record fluctuating signals in a document to the audio signal.

Animals use sound energy

Animals use sound energy for auditory communication they use noise-producing customs such as knocking and clicking.

Speakers

The speaker is charging with one battery which is boosted and connected to the battery and the battery is connected with the inverter, it is connected to a relay module and microcontroller and the switch is on sound energy into electrical energy.

Stethoscopes

Stethoscope consisting of air buds at the top put into ears and diaphragm at bottom-placed on patient skin for one minute and listen heart sound, abdominal sound.

Microphone

The microphone work using electromagnetic induction, the sound wave hit a diaphragm to a coil surrounded by a magnet which creates a magnetic field in the coil sound waves hitting the diaphragm are moving coil creates an electric current.

Audible communication

The sound of road construction is audible in the early morning and the dog whistle cannot hear by humans because the dog whistle sound is less than human hearing.

Science

For sound science experiment, take tightly wrap cover on top of empty bowl take uncooked rice pour on the top then take metal sheet near the bowl hit metal the rice moves.

Ultrasound imaging

It uses sound waves to create images of the human body it is commonly used to visualize fetuses in the womb during pregnancy.

Medicine, Ultrasound, Monitor, Doctor, Examination
Ultrasound imaging image credit: pixabay

Ultrasonic welding

It is a welding process in which vibrations which means sound energy are used to generate heat for welding, this works on the principle of ultrasonic vibration to create dynamic shear stress.

Seismic imaging

This technology measures reflected acoustic energy waves it gives the method of mapping sub-surfaces it works by sending acoustic energy waves created from sound waves through the layers.

Masking and privacy

Sound masking is a dedicated audio system is add unobtrusive background sound the purpose is to reduce the intelligibility of speech.

Localization

It refers to the listener’s ability to identify the location and human sense from any place in the sound field.

Enhancing cell growth

   Surface acoustic waves enhanced cell growth by induced vibration, cell growth depends on surface acoustic wave intensity.

Sound creating art

When a bow plays the metal square parts of the plate begin to vibrate couscous move around until they reach a plate that isn’t vibrating then resulting in art.

Stabilizing brain waves

 Music sound helps in relaxation, and concentration because dopamine is released during moments of enjoyment while listening to music.

Sonic boiler

It uses the power of sound to boil water high frequency sonic vibrations are measured within the silver bulb causing water to boil.

Plant growth

Playing music for plants helps them grow faster and healthier grow Indian botanists conduct several experiments on music and plant growth he found that certain plants grew an extra 20% height when exposed to music.

Revealing natural geometry

Sound waves create the geometric form which is a study of cymatics, cymatics is the science of steering noise into images.

Noise cancellation

Noise cancellation is the abstention of unneeded code in an electronic circuit. Noise-canceling earphones reduce the noise level, for example, one plus buds pro and Samsung galaxy buds pro.

Levitation

 Research from Spain and UK have discovered a new technique of acoustic levitation that allows an object to move independently on any axis using a specific kind of sound waves.

Echolocation

Bats continuously emit pulses of the sound of ultrasonic frequency higher than 20000HZ, bats hear an echo of their voice since they are using echoes to locate how far something is we call this technique echolocation.

Also Read:

Is Mercury Magnetic?

by
is mercury magnetic

Mercury, the smallest and innermost planet in our solar system, has a unique and complex magnetic field that sets it apart from other planets. The MESSENGER (MErcury Surface, Space ENvironment, GEochemistry and Ranging) mission, which orbited Mercury from 2011 to 2015, provided valuable insights into the planet’s magnetic field, revealing its exceptional weakness and distinct … Read more

Is Liquid Magnetic: A Comprehensive Guide

by
is liquid magnetic

Liquid magnetic materials, also known as magnetic liquids or ferrofluids, are a unique class of materials that exhibit strong magnetic properties while behaving like ordinary liquids. These materials are created by dispersing fine magnetic particles, typically made of iron oxide or other magnetic materials, into a carrier liquid such as oil or water. The resulting … Read more

Is Light Magnetic?

by
is light magnetic

Light is indeed magnetic, and this property is a fundamental aspect of its nature as an electromagnetic wave. The magnetic component of light waves is weaker than the electric component, but it can still be detected and measured under certain conditions. Measuring the Magnetism of Light One way to measure the magnetism of light is … Read more

Is Air an Insulator? A Comprehensive Guide for Physics Students

by
is air an insulator

Air is a remarkable substance that exhibits unique insulating properties due to its low density and the large distance between its molecules. This property makes air resistant to heat transfer, making it a valuable insulator in various applications. In this comprehensive guide, we will delve into the technical details and explore the physics behind why … Read more

Is Paper an Insulator? A Comprehensive Guide for Physics Students

by
is paper an insulator

Summary Paper is a widely used material that exhibits insulating properties, making it an important consideration in various applications, from building construction to electrical engineering. The insulating performance of paper can be quantified through the measurement of its thermal conductivity coefficient (λ), which is a key parameter in assessing the efficiency of insulation materials. This … Read more

5 Examples Of Electric Field? 5 Facts

by

The electric field is an electric property correlated with every point in space when the charge is present in any form. Let us see the examples of the electric field. The examples of the useful electric fields are listed below, Capacitor  Battery cells Balloon is rubbed against a sweater Comb is rubbed in the hair … Read more

Does Earth Have a Magnetic Field?

by
does earth have magnetic field

The Earth’s magnetic field is a crucial aspect of our planet’s geophysical and environmental characteristics. This magnetic field, generated by the movement of molten iron in the Earth’s outer core, extends from the planet’s interior to thousands of kilometers into space, forming the magnetosphere that shields us from harmful solar wind and cosmic radiation. Understanding … Read more

Magnetic Field at the Center of a Current Loop: A Comprehensive Guide

by
magnetic field at center of loop

The magnetic field at the center of a circular loop carrying a current is a fundamental concept in electromagnetism, with numerous applications in various fields of physics and engineering. This comprehensive guide will delve into the theoretical underpinnings, practical considerations, and measurement techniques related to this topic, providing a valuable resource for physics students and enthusiasts.

Understanding the Theoretical Foundations

Ampere’s Law and the Biot-Savart Law

The magnetic field at the center of a current loop can be derived using two fundamental laws of electromagnetism: Ampere’s Law and the Biot-Savart Law.

Ampere’s Law states that the line integral of the magnetic field around a closed path is proportional to the electric current enclosed by that path. Mathematically, this can be expressed as:

∮B⋅dl = μ0I

where B is the magnetic field, dl is an infinitesimal length element of the closed path, μ0 is the permeability of free space, and I is the electric current enclosed by the path.

The Biot-Savart Law, on the other hand, describes the magnetic field generated by an element of current. It states that the magnetic field dB at a point due to an infinitesimal current element I dl is given by:

dB = (μ0 / 4π) * (I dl × r) / r^2

where r is the vector from the current element to the point of interest.

By applying these laws to a circular current loop, one can derive the formula for the magnetic field at the center of the loop.

Derivation of the Magnetic Field Formula

Consider a circular loop of radius R carrying a current I. The magnetic field at the center of the loop can be calculated as follows:

  1. Divide the loop into infinitesimal current elements I dl.
  2. Apply the Biot-Savart Law to each current element to find the contribution to the magnetic field at the center.
  3. Integrate the contributions around the entire loop to obtain the total magnetic field.

The resulting formula for the magnetic field at the center of the loop is:

B = (μ0 * I) / (2 * R)

where μ0 is the permeability of free space, I is the current flowing through the loop, and R is the radius of the loop.

This formula provides an accurate representation of the magnetic field at the center of a circular current loop, assuming the loop is perfectly circular and the current is uniformly distributed around the loop.

Factors Affecting the Magnetic Field

While the formula B = (μ0 * I) / (2 * R) provides a good approximation of the magnetic field at the center of a current loop, there are several factors that can influence the actual magnetic field:

  1. Loop Geometry: The formula assumes a perfectly circular loop. Deviations from a circular shape, such as an elliptical or irregular loop, can affect the magnetic field distribution.
  2. Current Distribution: The formula assumes a uniform current distribution around the loop. In practice, the current may not be evenly distributed, leading to variations in the magnetic field.
  3. Proximity to Other Magnetic Fields: The presence of other magnetic fields, such as those generated by nearby current-carrying conductors or magnetic materials, can interact with the magnetic field of the current loop, altering the overall field.
  4. Temperature and Material Properties: The electrical and magnetic properties of the loop materials, such as the wire’s resistivity and the permeability of the loop, can change with temperature, affecting the magnetic field.

These factors should be considered when using the formula or when measuring the magnetic field at the center of a current loop.

Practical Considerations and Applications

magnetic field at center of loop

Numerical Examples

Let’s consider a few numerical examples to illustrate the application of the magnetic field formula:

  1. Example 1: A circular loop with a radius of 0.1 m carries a current of 2 A. Calculate the magnetic field at the center of the loop.

B = (μ0 * I) / (2 * R)
B = (4π × 10^-7 T·m/A) × (2 A) / (2 × 0.1 m)
B = 0.04π T

  1. Example 2: A circular loop with a radius of 0.5 m carries a current of 5 A. Calculate the magnetic field at the center of the loop.

B = (μ0 * I) / (2 * R)
B = (4π × 10^-7 T·m/A) × (5 A) / (2 × 0.5 m)
B = 0.1π T

These examples demonstrate how the magnetic field at the center of a current loop can be calculated using the provided formula.

Practical Applications

The magnetic field at the center of a current loop has numerous practical applications in various fields, including:

  1. Magnetic Resonance Imaging (MRI): MRI systems use strong, uniform magnetic fields to align the magnetic moments of hydrogen protons in the human body. The magnetic field at the center of the MRI coils is a critical parameter in the design and operation of these systems.

  2. Electric Motors and Generators: The magnetic field at the center of the armature windings in electric motors and generators plays a crucial role in the conversion of electrical energy to mechanical energy and vice versa.

  3. Particle Accelerators: Circular particle accelerators, such as cyclotrons and synchrotrons, rely on the magnetic field at the center of their circular paths to guide and accelerate charged particles.

  4. Magnetic Levitation: Maglev trains use the magnetic field at the center of their guideway coils to levitate the train, reducing friction and enabling high-speed transportation.

  5. Magnetic Sensors: Devices like Hall effect sensors and fluxgate magnetometers utilize the magnetic field at the center of their sensing elements to measure the strength and direction of magnetic fields.

These applications highlight the importance of understanding and accurately calculating the magnetic field at the center of a current loop.

Measurement Techniques and Instrumentation

Measuring the magnetic field at the center of a current loop requires specialized instrumentation and techniques. Some common methods and instruments used for this purpose include:

Hall Effect Sensors

Hall effect sensors are widely used to measure magnetic fields. They operate by detecting the voltage generated across a thin semiconductor material when a magnetic field is applied perpendicular to the material. Hall effect sensors can provide accurate and precise measurements of the magnetic field at the center of a current loop.

Fluxgate Magnetometers

Fluxgate magnetometers are another type of instrument used to measure magnetic fields. They consist of a ferromagnetic core wrapped with two coils: a primary coil that generates a magnetic field and a secondary coil that measures the changes in the magnetic field. Fluxgate magnetometers can provide high-sensitivity measurements of the magnetic field at the center of a current loop.

Search Coil Magnetometers

Search coil magnetometers, also known as induction magnetometers, measure the magnetic field by detecting the induced voltage in a coil of wire placed in the magnetic field. These instruments can be used to measure the magnetic field at the center of a current loop, particularly for time-varying or pulsed magnetic fields.

Calibration and Accuracy

Regardless of the measurement technique used, it is essential to calibrate the instruments to ensure accurate and reliable measurements of the magnetic field at the center of a current loop. Calibration can be performed using reference standards or by comparing the measurements with theoretical calculations.

The accuracy of the magnetic field measurements can be affected by various factors, such as the sensitivity and linearity of the instrument, the alignment of the sensor with the magnetic field, and the presence of external magnetic fields. It is important to consider these factors and take appropriate measures to minimize measurement errors.

Conclusion

The magnetic field at the center of a current loop is a fundamental concept in electromagnetism with numerous practical applications. By understanding the theoretical foundations, practical considerations, and measurement techniques related to this topic, physics students and enthusiasts can develop a comprehensive understanding of this important phenomenon.

This guide has provided a detailed exploration of the magnetic field at the center of a current loop, covering the derivation of the formula, the factors that can influence the magnetic field, practical applications, and measurement techniques. With this knowledge, readers can confidently apply the principles of electromagnetism to solve problems, design systems, and further their understanding of the physical world.

References:

  • Griffiths, D. J. (2013). Introduction to Electromagnetism (4th ed.). Pearson.
  • Serway, R. A., & Jewett, J. W. (2018). Physics for Scientists and Engineers with Modern Physics (10th ed.). Cengage Learning.
  • Halliday, D., Resnick, R., & Walker, J. (2013). Fundamentals of Physics (10th ed.). Wiley.
  • Nave, C. R. (n.d.). Magnetic Field of a Current Loop. HyperPhysics. http://hyperphysics.phy-astr.gsu.edu/hbase/magnetic/curloo.html
  • Magnetic Field Measurement Techniques. (n.d.). National High Magnetic Field Laboratory. https://nationalmaglab.org/education/magnet-academy/learn-the-basics/magnetic-field-measurement-techniques

Is Gravitational Field a Magnetic Field?

by
is gravitational field a magnetic field

The concept of a gravitational field being a magnetic field is not supported by current scientific understanding. While both gravity and magnetism are fundamental forces of nature, they have distinct properties and behaviors that make them separate and distinct phenomena.

Understanding Gravity and Magnetism

Gravity is a force that attracts two objects towards each other, regardless of their magnetic properties. It is a universal force that acts on all matter, including those without any magnetic properties. The strength of the gravitational force is directly proportional to the masses of the objects and inversely proportional to the square of the distance between them, as described by Newton’s law of universal gravitation.

On the other hand, magnetism is a force that attracts or repels objects based on their magnetic properties. Magnetic fields are created by the motion of electric charges, and they can either attract or repel other magnetic objects, depending on the orientation of their magnetic poles. Magnetism only affects objects with magnetic properties, such as iron, nickel, or cobalt.

Theoretical Differences

is gravitational field a magnetic field

Gravity is described by the theory of general relativity, which was developed by Albert Einstein in the early 20th century. This theory explains gravity as a consequence of the curvature of spacetime, where massive objects distort the fabric of spacetime, and other objects move in response to this distortion.

Magnetism, on the other hand, is described by the theory of electromagnetism, which was developed by James Clerk Maxwell in the 19th century. This theory explains magnetism as a result of the motion of electric charges, and it describes the relationship between electric and magnetic fields.

Quantifiable Differences

The strength of a magnetic field can be measured in units of Tesla (T) or Gauss (G), while the strength of a gravitational field can be measured in units of Newtons per kilogram (N/kg) or acceleration due to gravity (g). These units are fundamentally different and cannot be directly compared, as they represent different physical quantities.

For example, the Earth’s magnetic field varies from approximately 0.25 to 0.65 Gauss, while the acceleration due to gravity on the Earth’s surface is approximately 9.8 m/s².

Theoretical Speculations and Limitations

There have been some speculations that gravity may be a result of a magnetic field, as suggested in some theoretical models. However, there is no concrete evidence to support this claim, and it remains a subject of ongoing research and debate.

Similarly, the idea that magnetism may be a lens focusing or manipulating gravitational force, as suggested in some studies, is also not supported by current scientific understanding. The two fields are fundamentally different and cannot be directly compared or interchanged.

Conclusion

In summary, while both gravity and magnetism are important forces in nature, they are distinct and separate phenomena, described by different theories and characterized by different physical properties and behaviors. There is no evidence to suggest that a gravitational field is a magnetic field, and the two fields cannot be directly compared or interchanged.

References:

  1. https://quizlet.com/354052982/progress-check-a-flash-cards/
  2. https://van.physics.illinois.edu/ask/listing/225
  3. https://physics.stackexchange.com/questions/615581/can-a-gravitational-field-be-focused-like-a-magnetic-field